Part No 840245 10 Form No F060711D
MV650SPH Self-Propelled Vacuum Owner’s Manual
3. Secure the unit with left hand at the handle then pull starter rope with right hand to start engine.
PULL STARTER CORD slowly until resistance is felt. Then pull cord rapidly to avoid kickback.
4. Move throttle control back to FAST position and allow engine to reach correct operating speed.
5. For Electric models: Set the throttle to the fast position, then pull up and push forward on the start switch.
Choke if needed
VACUUM NOZZLE HEIGHT ADJUSTMENT
FOR MAXIMUM PICKUP: Adjust nozzle height as close to debris as possible, but without blocking airflow into the nozzle. NOTE:
Never bury nozzle into debris. The vacuum nozzle is raised and lowered by turning the crank handle clockwise and counter-
clockwise
.
SECURE UNIT AT
THE HANDLE
WITH LEFT HAND
DURING START
PULL ROPE
STARTER WITH
RIGHT HAND
On Electric
models only