Billy Goat KD505SPQ Vacuum Cleaner User Manual


 
Part No. 890311 Form No. F010396C
Page 5 of 12
VACUUM NOZZLE HEIGHT ADJUSTMENT: is raised
and lowered by lifting slightly upward on handle and pulling
height adjustment rod (Item 23) at left side of handle.
FOR MAXIMUM PICKUP: Adjust nozzle close to debris, but
without blocking airflow into the nozzle.
NOTE
: Never bury nozzle into
debris.
CLEARING A CLOGGED NOZZLE
& EXHAUST: Turn engine off and wait for impeller to
stop completely and disconnect spark plug wire. Wearing
durable gloves, remove clog. Danger, the clog may
contain sharp materials. Reconnect spark plug wire.
VACUUMING OPERATION
ENGINE: See engine manufacturers instructions
for type and amount of oil and gasoline used.
Engine must be level when checking and filling oil and
gasoline.
ENGINE SPEED: Controlled by throttle lever on the handle.
Under normal conditions, operate at minimum throttle to
accomplish your current cleaning task.
FUEL VALVE: Move fuel valve to "ON" position (when
provided on engine).
CHOKE: See Primer.
PRIMER: Push primer per engine instructions.
THROTTLE: Move remote throttle control to fast position.
Pull starting rope to start engine.
IF YOUR UNIT FAILS TO START:
See Troubleshooting on page 12.
PUT OIL IN ENGINE BEFORE STARTING.
Inspect machine work area and machine before operat-
ing. Make sure that all operators of this equipment are
trained in general machine use and safety.
Do not operate if excessive vibration occurs. If excessive
vibration occurs, shut engine off immediately and check for
damaged or worn impeller, loose impeller bolt, loose impeller
key, loose engine or lodged foreign objects. Note: See parts
list for proper impeller bolt torque specifications. (See trouble
shooting section on page 12).
INTENDED USE: This machine is designed for vacuuming
leaves, grass clippings and other types of organic litter.
Debris mixed with cans, bottles and small amounts of sand
can be vacuumed; however, it is not this machine's primary
purpose. Vacuuming cans, bottles and sand will affect the
longevity of your machine.
OPERATION
1616
1616
16
Like all mechanical tools, reasonable care must
be used when operating machine.
16.116.1
16.116.1
16.1
STARTING
16.216.2
16.216.2
16.2