Bernina 730 Sewing Machine User Manual


 
4
General information:
Securing Function (with 4 stitches) (p. 32)
Activate the Securing Function before sewing, while Pattern Begin is active; the
sewing computer will secure the beginning and the end of the first stitch with four
small stitches. The machine will not stop stitching after securing.
Activate the Securing Function before or while sewing, to secure only at the end
of the actual stitch. The sewing computer will not stop sewing after securing.
Activate the Securing Function while sewing individual stitches, the stitches will be
secured at the end and the machine will continue to stitch.
Activate the Securing Function and Pattern End before beginning to sew or while
sewing, the sewing computer stops after securing at the end of the individual
stitch pattern.
When programming the Securing Function within a stitch combination, each pat-
tern will be secured at the beginning and at the end.
Securing Program (pg 32)
For security, center needle position is selected and cannot be changed while the
function is active.
Long Stitch (pg 30)
The Long Stitch function may be used with all utility and decorative stitches, it is
not available for use with the buttonholes and sideways motions stitches.
Triple straight stitch #6 may result in unsatisfactory stitch quality when combined
with the Long Stitch function; use new stitch #31 instead. Stitch #31 in combina-
tion with Long Stitch will result in a stitch length of 10mm.
Quilters Securing Program (pg 138)
Stitch #1324 automatically secures the stitching with 5 short securing stitches for-
ward at the beginning and the end of the seam.
Note the stitches found on the Quilt Menu (300 series stitches) are prefixed with a
1 (ie. #324 is now #1324).
Spinning Spool (pg 206)
A Spinning Spool indicates data being calculated. When the spool is present, do
not insert or remove any external devices (ie. USB Stick, PC cables etc) or at-
tempt to make any changes on the screen.
In the event the spool continues to spin, switch the embroidery computer off and
on again.