Filter
Top Products
3
Checking Max Speed
• Touch Reg S.P.M. the Check Speed screen appears.
• Press foot control, ease off slightly then press down
completely.
• The current speed (S.P.M) is displayed. If the speed is
over 950 S.P.M., a speed calibration must be performed.
Touch Esc. to close the screen.
Calibrating the Speed
• Touch Max S.P.M. , the Speed Calibration screen ap-
pears.
• Press the foot control until the sewing computer stops. If
the calibration was successful, a green OK will display. If
a red X appears, repeat the calibration process.
• Follow the prompts on the screen to close the window.
USB-Stick
• The USB data stick has 256 MB disk space.
• Never remove the USB stick when data is being proc-
essed (recalculation of stitches, for example) or when
WordArt is still active.