Filter
Top Products
ST-4125D/ST-6125D SUBMERSIBLE PUMPS — OPERATION AND PARTS MANUAL — REV. #1 (06/12/08) — PAGE 9
ST-4125D/ST-6125D — SPECIFICATIONS
1. Motor Rotation – Upon start-up, the pump "
kicks
" in the opposite direction of motor rotation. The correct rotation is
counterclockwise (CCW) as viewed from the impeller end of the pump.
2. Mechanical Seal Oil – Use a good grade 10 weight non-detergent hydraulic oil (i.e. Shell Turbo 32 or equivalent). Fill oil cavity
75% to 85% full (allow air space for expansion).
3. Control Box - Control box (Table 2) is required for use to provide thermal overload protection to the pump.
SNOITACIFICEPS.1ELBAT
ledoMD5214-TSD5216-TS
epyTpmuPelbisrembuSlagufirtneCpmuPelbisrembuSlagufirtneC
rellepmInorIelitcuDtsaCnorIeli
tcuDtsaC
eziSegrahcsiD&noitcuS)mm15(.ni00.2)mm15(.ni00.2
yticapaCgnipmuPmumixaM
etunim/snollag464
)etunim/s
retil657,1(
etunim/snollag016
)etunim/sretil903,2(
daeHxaM)sretem83(.tf521)sretem83(tf521
rewoP)wk5.7(PH01)wk
11(PH51
esahP/egatloVØ3064/032Ø3064/032
spmAgnitratS
)V032(941
)V064(57
)V032(512
)V064(801
spmAgninnuR
)V032(72
)V064(41
)V032(93
)V064(7.91
deriuqeRxoBlortnoC3etoNeeS3etoNeeS
htgneLelbaCrewoP)m2.51(.tf05)m2.51(.tf05
thgieWteNyrD)gk051(bl033)gk771(bl093
thgieH)mc1.38(ni7.23)mc6.89(ni8.83
retemaiD)mc63(ni2.41)mc63(ni2.41