Filter
Top Products
10
EXTERIOR CLEANING:
INTERIOR CLEANING:
!
!
!
!
!
!
!
!
Refer to above when preparing and using cleaning solution.
Dip towel in cleaning solution
Wipe down exterior of unit.
pressure wash, hose-down, immerse, or spray the cabinet or any part of it. Follow with a clean
damp cloth to remove residual cleaning solution. Allow surfaces to air dry. Wipe exterior with towel and
stainless steel polish (ortowel andlemon oil).Polish witha clean,soft cloth.
"CAUTIONS"
DO NOT
!
!
CAUTION:
DO NOT
DO NOT
NOT
DO NOT
MOVING CABINET:
Disconnect cord set from powersupply beforecleaning.
use abrasives or harsh chemicals.
Open door allthe way.
Remove ledge assemblies.
Remove holding orproofing unit,drip troughand airtunnel.
Clean holding orproofing unit.
spray electric heatunit with water orsteam. Wipewith adamp cloth.
(Be sure electric cord is plugged into power source.)
Wipe interior of unit witha toweland detergentsolution.
pressure wash, hose-down, immerse, or spray the cabinet or any part of it. Remove
detergent residue witha cleandamp towel.Allow surfacesto airdry.
Make sure dooris securedbefore movingcabinet.
Unplug electrical cord before movingcabinet.
Empty water fromproofing pan, ifapplicable.
Remove drip troughand pourout condensationbefore moving,if applicable.
!
!
!
!
!
!
!
!
!
!