Filter
Top Products
Operation MAC2000
4. Depending on the percentage of air found in the internal tank,
perform one of the following:
• If the display shows “Identifier result: EXCESSIVE,” then
purge the tank by first pressing the Reset key to display the
message “Would you like to purge air?” Then press the Start
key to begin purging air. When complete, the Main menu will
appear. Repeat Steps 2, 3, and 4 until the percentage of air
within the internal tank is at an acceptable level.
• If the display shows “Identifier result: RECOVERABLE,”
then the amount of air within the tank is at an acceptable
level. Press the Reset key to display the message “Would you
like to purge air?” Then press the Reset key again to return
to the Main menu.
28 Instruction 2072-0400