Filter
Top Products
8
All other models: Install two Duotec
strips directly on the carrier plate. Install
the remaining two strips on the back of the
escutcheon.
Turn on the water supplies. Grasp the stop unit
portion of the cartridge and turn it.
If there is a leak around the cartridge, turn the
supplies off, and remove the cartridge. Confirm
that the sealing gasket from the flushing plug was
removed.
Reinstall the cartridge. Turn the stop unit.
If the unit continues to leak, contact Hansgrohe
Customer Service for a replacement cartridge.
Perform the following test to check for damage to the ceramic
plates inside the stop unit.
Failure to correctly perform this test can result in possible water
damage.
Solaris oval escutcheon only: Install the
white spacers on the carrier plate (a). Install two
Duotec strips on the spacers (b).
Install the remaining two strips on the back of the
escutcheon.
stop unit
a
b
English