Filter
Top Products
10
User Instructions
The ThermoBalance II has two control features: the Temperature Selector and the Diverter /
Volume Control.
The Diverter/Volume Control handle controls the water flow.
The center position is “off”.
Turn the handle counter-clockwise to send
the water to outlet I (the bottom outlet).
Turn it clockwise to send the water to
outlet II (the top outlet).
The further you turn the handle from the
“off” position, the greater the water flow.
Turn the Temperature Selector counter
clockwise to make the water warmer.
It will stop when the water is 100° F
– this is the safety stop.
Override the safety stop by pressing in-
ward on the Temperature Selector and
continuing to turn it counter-clockwise.
Turn the Temperature Selector clockwise
to make the water cooler.
IMPORTANT: the Temperature Selector
will not automatically “reset” to below
100° when the water is turned off.
<100°100° >100°
English