Filter
Top Products
AXIS T90C10/T90C20 Installation Guide Page 13
ENGLISH
Troubleshooting
Warranty
For information about Axis' product warranty and thereto related information, see
www.axis.com/warranty
Problem Solution
IR-LED will not turn on • Check RJ45 connector is securely inserted
(AXIS T90C20 IR-LED)
• Check that supply voltage of PSU is 18-56V DC; ensure correct
polarity (AXIS T90C10 IR-LED)
• Adjust photocell (+ increases sensitivity; - decreases sensitivity)
• Check if photocell is working; cover photocell, LEDs should turn
on; if not, please contact Axis.
If the image is too bright • Adjust power (see image below)
0%100%
-
+
Photocell adjuster
Adjust power
Move cables to see photocell adjuster