Filter
Top Products
To modify the Saturday and Sunday schedules :
6- Press on Day button until SA or SU is displayed.
7- Press on PGM button to select Prog. 1 ( ) and Hour and Min buttons to
enter 7:30 AM.
8- Press on PGM button to select Prog. 2 ( ) and then Clear button to erase it.
9- Press on PGM button to select Prog. 3 ( ) and then Clear button to erase it.
10- Press on PGM button to select Prog. 4 ( ) and then Hour and Min buttons
to enter 11:00 PM.
11- Press on Mode button to exit this function.
TEMPORARY OR PERMANENT TEMPERATURE
BYPASS
This operation allows you to temporarily modify the temperature while you are
in the Automatic mode. Simply press on or button to select the desired
temperature, or the or button to select the Comfort or Econo setting you
have programmed. This temperature will be maintained until the beginning of
the next program.
You can also switch to the Vacation setting for a prolonged absence by pressing
on and buttons at the same time. The display will show icon. In that
case, the temperature bypass is permanent. To return to the normal operating
mode, press on Mode button.
If you wish to return immediately to the programmed settings, press on Mode
button twice.
MEMORY BACKUP
In the event of a power failure, an internal circuit will maintain the programming.
Only the time will have to be set if the power failure is more than two hours. The
thermostat will return to the same operating mode as set before the power failure.
CHARACTERISTICS
This thermostat works differently than the con-
ventional electromechanic one. The latter can
have a differential of temperature up to 4 °C
(7.2 °F) while this electronic thermostat has one
of only 0.2 °C (0.36 °F). This slight oscillation
eliminates the discomfort often found with con-
ventional electromechanic thermostats.
The proportional controller determines the
amount of power required by the electric heating
system to maintain the exact ambient tempera-
ture of the temperature setting.
To see this process, the display shows, in
real time, the percentage of power applied
to the electric heating system.
- Model : TH106
- Supply : 120/240 VAC, 50/60 Hz
- Load : 16.7 A max. (resistive only)
1.0 A min.
- Power : 4000 W @ 240 VAC
2000 W @ 120 VAC
- Minimal load : 240 W @ 240 VAC
120 W @ 120 VAC
- Approval : cULus
- Display range : 0 to 60 °C (32 to 140 °F)
- Setting range : 5 to 30 °C (40 to 85 °F)
- Storage : -20 to 50 °C (-4 to 120 °F)
- Default setting : 20 °C (68 °F)
- Default setting : 18 °C (64 °F)
- Default setting : 10 °C (50 °F)
For savings to be obtained, you must lower the temperature for a period of 2 to
3 times the delay required to bring the temperature back to your comfort level.
Example : If your system takes one hour to go from your saving temperature
level to your comfort temperature level, it is useless to lower the temperature for
a period less than 2 to 3 hours.
a) To Program your schedule :
1- Press on PGM button to access the programming mode.
2- Press on Day button to select the day to be programmed. You can select all
days of the week by pressing on Day button for 3 seconds.
3- Press on PGM button to select program 1, 2, 3 or 4.
4- Press on Hour and Min buttons to program the time.
5- When you have completed your programming, press on Mode button to exit
this function.
b) To Erase a Program :
Select the program using PGM and Day buttons, and press on Clear button.
The time field displays --:-- when the program is inactive.
c) Example 1 : Comfort period from 7:00 AM to 10:30 PM
Economy period from 10:30 PM to 7:00 AM
Identical schedule for all days of the week.
1- Press on PGM button to access the programming mode.
2- Press on Day button 3 seconds to select every day of the week.
3- Press on Hour button to enter 7:00 AM, Prog. 1 ( ).
4- Press 3 times on PGM button to select Prog. 4 ( ), and press on Hour and
Min buttons to enter 10:30 PM.
5- Press on Mode button to exit this function.
Schedule/Day
PROG. 1
PROG. 2
PROG. 3
PROG. 4
MON.
7:00 AM
---
---
10:30 PM
TUES.
7:00 AM
---
---
10:30 PM
WED.
7:00 AM
---
---
10:30 PM
THU.
7:00 AM
---
---
10:30 PM
FRI.
7:00 AM
---
---
10:30 PM
SAT.
7:00 AM
---
---
10:30 PM
SUN.
7:00 AM
---
---
10:30 PM
d) Example 2 : Comfort period Monday to Friday from 6:15 AM to 8:15 AM and
from 5:00 PM to 10:00 PM.
Saturday and Sunday from 7:30 AM to 11:00 PM
NOTE : It is faster to program the same schedule for every day and then modify
the exception days.
1- Press on PGM button to access the programming mode.
2- Press on Day button 3 seconds to select every day of the week.
3- Press on Hour and Min buttons to enter 6:15 AM Prog. 1, ( )
4- Press on PGM button to select Prog. 2 ( ) and Hour and Min buttons to
enter 8:15 AM.
5- Repeat step 4 to enter Prog. 3 (5:00 PM) and Prog. 4 (10:00 PM).
NOTE : When making modifications, make sure you are in the right program.
Schedule/Day
PROG. 1
PROG. 2
PROG. 3
PROG. 4
MON.
6:15 AM
8:15 AM
5:00 PM
10:00 PM
TUES.
6:15 PM
8:15 PM
5:00 PM
10:00 PM
WED.
6:15 AM
8:15 AM
5:00 PM
10:00 PM
THU.
6:15 AM
8:15 AM
5:00 PM
10:00 PM
FRI.
6:15 AM
8:15 AM
5:00 PM
10:00 PM
SAT.
7:30 AM
---
---
11:00 PM
SUN.
7:30 AM
---
---
11:00 PM
Program
Time
Wake-up time
Leaving time
Return time
Bed time
Mode
Comfort
Economy
Comfort
Economy
100%
80%
60%
40%
20%
920-106-001-00-1-B 3/4