Filter
Top Products
STRIKES
Page 9
eBoss™ Electronic Lockset
ATTACHING SCREWS
Model No. Front Backset Throw Front Width Latch Diameter
694 Beveled 2-3/4" 1/2" 1-1/8" (29mm) 1" (25mm)
F694 Flat 2-3/4" 1/2" 1-1/8" (29mm) 1" (25mm)
3694 Beveled 3-3/4" 1/2" 1-1/8" (29mm) 1" (25mm)
480 Beveled 2-3/4" 5/8" 1-1/8" (29mm) 1" (25mm)
F480 Flat 2-3/4" 5/8" 1-1/8" (29mm) 1" (25mm)
3480 Beveled 3-3/4" 5/8" 1-1/8" (29mm) 1" (25mm)
480B Beveled 2-3/4" 3/4" 1-1/8" (29mm) 1" (25mm)
F480B Flat 2-3/4" 3/4" 1-1/8" (29mm) 1" (25mm)
3480B Beveled 3-3/4" 3/4" 1-1/8" (29mm) 1" (25mm)
Note: To order with lockset, specify model number. To order separately, specify model number and finish.
For Model No. 495
#8-8-32 x 3/4" (19mm) Phillips flat head
combination wood and machine screws.
P/N 81-2012-0416
For Model No. 497
#12-12-24 x 1" Phillips flat head
combination wood and machine screws.
P/N 81-2012-0620
NOTE:When ordering strike or attaching screws individually, specify the finish required;i.e. 497 x 202 x 606.
STRIKES
Yale
®
eBOSS™ locksets are supplied standard with a 497 ANSI strike. A variety of optional strikes are also
available. All strikes are located on the same vertical and horizontal center lines as the latchbolt. Some strikes
are available in a variety of lip lengths to accommodate varying thickness of doors and frames. To determine
the proper length of the lip, measure from the center line of the strike to the edge of the jamb and add 1/4"
(6mm). All strikes are reversible.
Model No. 497 ANSI Strike
1-1/4" supplied standard. 1-1/8",
1-1/2", and 1-3/4" lip lengths
available by special order. For door
and frames with ANSI A115.2
preparations.
Model No. 495 Strike
1-1/4" curved lip, wrought box
supplied. 1", 1-1/2", 1-3/4" and 2"
curved lip lengths available by
special order.
Model No. 202 Strike Box
Available to special order. Specify
497 x 202.
DEADLOCKING LATCHBOLTS