Filter
Top Products
FEATURES AND BENEFITS
Page 4
eBoss™ Electronic Lockset
Features Benefits
Grade 1 Cylindrical
Motorized Lock
Based upon the field proven Yale
®
5400LN lockset
Utilizes 5400LN Components
Allows maintenance/changing the mechanical portion of the lockset without touching of the
electronic portion
Battery Operated
Standalone technology is convenient and less expensive than hard wiring. Six AA alkaline
batteries typically allow a 100,000 cycles before replacement is necessary.
Two-Tier Low Battery Indicator Visual and Audible – allows time to change batteries before unit fails to operate
Audible Pushbutton Feedback Gives audible acknowledgement of operation (can be disabled)
Weather Resistant Keypad
Allows exterior application without gasketing. Conformal coated PCB and silicone sealed
circuitry ensures protection in the harshest environments.
Request to Enter Input Allows remote access capability (2 wire)
Hard Wire Input Option 9 Volt DC input allows continuous power (see page 8 for power supplies)
Passage Code Function Allows maintained entry for high volume non-restricted traffic
Emergency Code Function
Allows emergency entry when the controller low battery voltage is in the “black out” condition
or when the lock is in lockout mode.
Lockout Code Function
Restricts user access. Only the Supervisor code and the Emergency code will override the
lockout.
Non-Volatile Memory Maintains all codes when power is lost or batteries are being changed
Modular Design No need to replace the entire lock if keypad portion is damaged, or vice-versa
Variety of Finishes Matches all available Ya l e architectural finishes
User Friendly Programming Saves time and can be accomplished at the keypad without the use of a computer or PDA
94 User Capacity Provides diversity and flexibility of use
Easily to retrofit and install
eBOSS™ easily retrofits most cylindrical and electromechanical locks that utilize the standard
ANSI A115.2 series prep.
Secure Design
eBOSS provides the maximum in tamper resistance with the controller board located on the
secure side of the door.Interfering with or even destroying the keypad will not release the door.
Code Security
Factory master and emergency preset codes must be changed before any other codes can be
programmed.