Filter
Top Products
Service Reference Manual ACCESSORIES
7-13
SRM-HW/HWC 8/99
Use of spray lubricant or liquid soap will aid in the installation of rubber
parts.
Compressor belly is rounded and can be “rocked” on the belly support. It
is easiest to install one spring grommet at a time. Start with the most
difficult to access compressor mounting leg and work in a crisscross
pattern from back to front.
Compressor mounting bolts should be tightened down so that the metal
sleeve is secured fast to the chassis base and bolt head. Before securing
the final bolt, make sure that the wooden block or material supporting the
belly of the compressor has been removed.
TABLE 7-4 34961A001 Parts List
traPytitnauQ
recapSrebbuRreppU4
recapSrebbuRrewoL4
gnirpS4
eveelSlateM4