Filter
Top Products
EN - 17
SHORT TERM
Clean unit thoroughly with mild soap and low-
pressure water. Never spray unit with high-
pressure water. Do not use abrasives,
solvents or harsh cleaners.
Inspect unit for visible signs of wear,
breakage or damage and repair as needed.
Keep all nuts, bolts and screws properly
tightened and know unit is in safe working
condition.
Do not store unit outdoors. Store in a cool,
dry, protected area.
Protect bare-metal areas with a light coat of
oil or anti-rust compound.
Collection bag may be stored in position on
unit.
LONG TERM
Perform all short term storage items.
Touch up all scratched painted surfaces.
Matching touch-up paint is available from
your Dealer.
Remove all fuel from fuel tank and carburetor
(run dry). See Engine Manual.
Remove all debris from collection bag.
Decomposed debris may generate enough
heat to catch fire.
Fuel Stabilizer
Gasoline left in the fuel system for extended
periods without a stabilizer will deteriorate,
resulting in gum deposits in the system.
These deposits can damage the carburetor
and the fuel hoses, filter and tank. Prevent
deposits from forming in the fuel system
during storage by adding a quality fuel
stabilizer to the fuel. Follow the
recommended mix ratio found on the fuel
stabilizer container.
To treat the fuel system for storage:
1. Add fuel stabilizer (Ariens part number
00592900) according to manufacturer’s
instructions.
2. Run engine for at least 10 minutes after
adding stabilizer to allow it to reach the
carburetor.
Never store the engine with fuel in the fuel
tank inside of a building with potential
sources of ignition.
To Take Unit Out of Storage
1. See Engine Service Manual to prepare
engine for service.
2. Put fresh, clean fuel in fuel tank.
3. Begin maintenance schedule.
STORAGE