Filter
Top Products
6
68˚
RESUME
PROG.
MENU
20˚
OUTDOOR
HOLD TIL 4:00PM
HEAT 72
SETPOINT
HEATING
FAN ON
68˚
INFO MENU
20˚
OUTDOOR
03/31/04 8:32 AM
HEAT 68
SETPOINT
FAN AUTO
HEAT MODE
72˚
HOLD THIS
TEMPERATURE
UNTIL 4:00PM
HEAT
BACK SAVE
68˚
INFO MENU
20˚
OUTDOOR
03/31/04 8:32 AM
HEAT 68
SETPOINT
FAN AUTO
AUTO MODE
COOL 75
72˚
HOLD THIS
TEMPERATURE
UNTIL 4:00PM
HEAT
BACK
75˚
COOL
68˚
RESUME
PROG.
MENU
20˚
OUTDOOR
HOLD TIL 4:00PM
HEATING
FAN ON
HEAT 72
SETPOINT
COOL 75
2. Temporarily Raising and Lowering the Temperature
You can raise or lower the temperature during the current event of the program by simply
pressing the Up/Down buttons.
Example: The Setpoint is at 68°, you want the temperature to be 72°.
If you are in AUTO Mode, both heat and cool settings will be displayed on the hold screen.
First you can change the Heat setting, then the Cool setting. If you do not want to change one
of these settings, simply press select to go to the next setting or to go to the main screen.
The message center displays when the thermostat will return to programmed operation.
Press the RESUME PROG. button to return to programmed operation at any time.