Filter
Top Products
Model 65 Humidifier Control
Installation Instructions
READ AND SAVE THESE INSTRUCTIONS
CAUTION
1. Read all instructions before beginning installation.
2. Do not adjust humidity set-point above recommended level or to recommended
level if condensation occurs on inside surface of windows or on other surfaces.
Excess condensation can cause damage to structure or furnishings. Excess
moisture can also allow the possibility for mold growth to occur.
3. Do not use solvents or cleaners on or near the display and circuit board.
Chemicals can damage components.
WARNING
1. Improper installation may cause property damage or injury. Installation, service,
and maintenance must be performed by a qualified service technician.
2. 120 Volts may cause serious injury from electric shock. Disconnect electrical
power before starting installation or servicing. Leave power disconnected until
installation/service is completed. This control is not a 120 Volt (line voltage)
device.
SAFETY INSTRUCTIONS
The Model 65 is for use with any humidifier
requiring an ON/OFF signal for a 24 volt circuit.
1