Filter
Top Products
7
Operation
Power Turn the unit on or off by pressing the Power button.
Cooling • To select the Cooling mode, press the Mode button
until the cooling mode indicator appears in the
LCD
window.
• Set the fan speed by pressing the Fan Speed button.
The fan speed indicator in the
LCD window will
display what speed has been selected - high, medium or
low.
• Set the temperature by pressing the Temperature button
up or down arrow . The
LCD window will display
the current temperature selected.
Dehumidify • To select the Dehumidify mode, press the Mode
button until the dehumidify mode indicator
appears in the
LCD window.
• Check that the condensate tank is empty and is properly
seated.
• Do not use the exhaust duct.
Note: Fan speed cannot be adjusted when in
Dehumidify mode.
Fan • To select the Fan Mode, press the Mode button
until the fan icon appears in the
LCD window.
• Set the fan speed by pressing the Fan Speed button .
The fan speed indicator in the
LCD window will
display what speed has been selected - high, medium or
low.
Louver Press the Louver button to automatically provide even air
distribution. The louver
on indicator will appear in the
LCD
window when this mode is on.
Note: You can direct the airflow to an even more specific area
by adjusting the manual louvers.
Continued on next page