Filter
Top Products
6
Installation continued
Check
components
1. Check that the condensate tank on the side of the unit is in
place and is properly seated. If the tank is not installed
properly, the unit will not operate.
2. Open the air filter cover on the left side of the unit and
check that the air filter is clean.
Power the unit 1. Plug the unit into a wall outlet. Wait two seconds for the
unit to beep.
Note: The unit has a 6-foot power cord. Do not plug the
unit into an extension cord.
2. Turn the unit on by pressing the Power button on the con-
trol panel.