Filter
Top Products
InRoom SC 50 Hz User Guide14
Display Interface
Display Screen Information
Item
Function Description
1
Sleep mode indicator Sleep mode is an undercooling mode that is used during times of non-
peak heat. Sleep mode is activated by setting the timer. The set
temperature will automatically increase at intervals until the timer turns
off the Sleep mode.
2
Cool mode indicator Cool mode cools the room. Temperature and fan speed are set by the user.
3
Fan mode indicator Fan mode moves air only. The fan speed is set by the user.
4
Dry mode indicator Dry mode dehumidifies the room. The fan speed is Low only.
5
Set Time Displays the timer interval (0.5 to 24 hours) and if the timer is on or off.
6
Fan Speed indicator Bars labeled Low, Medium and High indicate fan speed.
7
Auto mode indicator In Auto mode the microprocessor chooses Fan, Cool or Dry mode
depending on the Set Temperature setting.
8
Set Temp Displays the Set Temperature.
FA N
COOL
SLEEP
SET TEMP SET TIMEAUTO
LOWMEDHIGH
°C
ON
OFF
DRY
na3367a