Filter
Top Products
InRoom SC 50 Hz User Guide8
Installation
Location
Requirements
Dimensions are shown in mm (in).
> 500 (20)
> 500 (20)
na3362b
MO
DE
InR
oom
SC
TEMP
When deciding where to locate the cooling
unit, consider cooling needs, air flow, and
the location of the electrical outlet. The
cooling unit can be no more than 2.4 m
(8 ft) from the electrical outlet.
Cooling needs. Position the cooling unit
as close as possible to the main heat source
that requires cooling.
Air flow. Position the cooling unit at least
500 mm (20 in) away from a wall or other
equipment on any side to avoid impeding
air flow.
Location of electrical outlet. Place the
cooling unit no farther than 2.4 m (8 ft)
from a dedicated 220-240V, 50Hz, 15A
branch circuit receptacle.
Electrical Hazard: Do not use extension cords with this equipment. Using an extension
cord reduces circuit protection and will void the warranty.
The cooling unit shall be installed in accordance with national wiring regulations.
The cooling unit shall not be installed in a laundry room.
Caution: To help avoid loss of cooling, only connect this equipment to a single-outlet
dedicated circuit.