Filter
Top Products
Product names listed herein are trademarks of American Standard Inc.
©American Standard Inc. 2000
2
3
HOTLINE FOR HELP
For toll-free information and answers to your questions, call:
1 (800) 442-1902
Weekdays 8:00 a.m. to 7:00 p.m. Eastern Time
Unscrew the HOLDER from the SHOWER ESCUTCHEON. Slip the
SHOWER HOSE through the HOLDER and the SHOWER ESCUTCHEON.
Insert a SEAL WASHER into the SHOWER HOSE CONNECTOR.
Pull out the SLEEVE GUARD and HOSE. Unthread the SLEEVE GUARD
from the HOSE END connection. Be careful not to allow the HOSE to
fall back through the SLEEVE.
Thread the SHOWER HOSE onto the HOSE END connection and tighten
securely.
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
SHOWER HOSE
HOSE
HOSE END
SHOWER HOSE
SET SCREW
RUBBER RING
SHOWER ESCUTCHEON
SHOWER
ESCUTCHEON
HOLDER
SEAL WASHER
S
EAL WA
S
HE
R
SLEEVE
GUARD
SLEEVE
SEALANT
HAND SHOWER
HAND SHOWER
HOLDER
SEAL WASHER
HANDLE
SCREW
INSTALL HANDLE TRIM
INSTALL HAND SHOWER
Turn HANDLE STEM fully clockwise (Tub Filler position).
Place the HANDLE on the HANDLE STEM. Install the
HANDLE SCREW and tighten securely.
Push the INDEX BUTTON into the top of HANDLE.
HANDLE
STEM
HANDLE
INDEX
BUTTON
M968356
Apply a sealant around the HOSE HOLE.
Thread the SHOWER ESCUTCHEON into the SLEEVE until the ESCUTCHEON
contacts the finished deck.
Loosen the SET SCREW in the SHOWER ESCUTCHEON and rotate the
ESCUTCHEON towards the center of the tub. Retighten the SET SCREW.
Thread the HOLDER into the SHOWER ESCUTCHEON.
Insert a SEAL WASHER into the SHOWER HOSE
connector and connect the HAND SHOWER.
Place the HAND SHOWER into the HOLDER.
SLEEVE