Filter
Top Products
11
Operation
The unit will operate daily according to the timer setting, unless changed.
After a power failure, or after the unit has been unplugged, you will have to program the
timer settings again.
Canceling the Timer Setting
In order to cancel the timer programming press the TIME button.
Sleep Mode
The SLEEP MODE gradually adjusts the temperature of the unit 4 degrees upward,
over a 3 hour period, to meet the needs of a body at rest.
To activate the SLEEP MODE:
• Ensure the unit is operating in Cool Mode.
• Set the desired starting temperature.
• Press SLEEP MODE button.
• In sleep mode fan will operate in low speed.
• To cancel this function press SLEEP MODE button again.
Shutting Off the Blue Light on Control Panel
Normally there is a blue light on the LCD display.
To shut it off, press the UP and DOWN push buttons at the same time.
The blue backlight will blink twice, and after 3 seconds, will go off.
Pressing any of the push buttons will re-light the blue backlight.
Auto Grill Function
1. When unit is being connected (plugged in) to the electricity the louvers open and
close (and stay closed).
2. When the ON button is pressed, the louvers open to the maximum and return to an|
angle of 75º above the upper plane of the louvers housing (AUTO GRILL).
3. When the swing push button is pressed, the louvers swing up & down between
30º and 80º above the upper plane of the louvers housing (SWING).
4. When the louvers are moving in the swing function, by pressing the swing push button,
the louvers stop moving and remain in the same position (SWING). This enables the
user to direct the airflow vertically via the remote control.
5. When the OFF push button is pressed, the louvers close (AUTO GRILL).