Amcor HWAM9KE Air Conditioner User Manual


 
41
OPERATION
GB
General
Turn the appliance on with the button [1]. This activates the most recent
setting.
The on/off button turns the appliance off; the type of operation set at that
time is stored in the memory.
The desired temperature is set with the up [4] and/or down [5] button, within the
limits of the thermostat: 18°C – 25°C.
Use the fan button to set the fan speed at low: , medium: , high:
or automatic (the symbol on the display will flash). The fan speed in the
automatic setting is determined by the difference between the set temperature
and the room temperature.
Setting the time
The time must be set after initial installation and at the start of a new period of use.
With batteries (new, if necessary) in the remote control:
Press the clock button [8] to set the time. Use the up button for hours and the
down button for minutes.
Cool
1. Press the mode button until the cool symbol appears.
2. Set the desired temperature.
3. Use the fan button to set the fan speed.
Heat
1. Press the mode button until the heat symbol appears.
2. Set the desired temperature.
3. Use the fan button to set the fan speed.
Dehumidify (9KE max. 17 L/24h, 12KE max. 24 L/24h)
1. Press the mode button until the dehumidify symbol appears.
2. Set the desired temperature.
3. The fan button does not work in dehumidify mode. The fan speed will always be
low in this mode.
Fan mode
1. Press the mode button until the fan symbol
appears.
2. Set the desired temperature.
3. Use the fan button to set the fan speed.