Filter
Top Products
9
english
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
1)
Option depending on model
5.1.2 Picking up liquids
Before liquids are picked up,
always remove the filter bag/
waste bag and check that the
float (ATTIX 360-2M/550-2M/
751-2M) or the water level limit
(ATTIX 560-2MXC/761-2MXC)
works properly. (See section
7.2.5 and 7.2.6 “Replacing the
filter element“.)
The use of a separate filter ele-
ment or filter screen is recom-
mended.
If foam appears, stop work im-
mediately and empty the tank.
To reduce the amount of foam,
use foam killer Nilfisk-Alto Foam
Stop (see section 9.5 „Accesso-
ries“ for order number).
6 After finishing work
6.1 Switching the vacuum
cleaner off and storage
1. After picking up hazardous
dust, vacuum clean the out-
side of the cleaner.
2. Switch off the vacuum clean-
er and pull the mains plug
out of the socket.
3. Wind up the power cord and
hang it on the handle.
4. Empty the tank and clean the
vacuum cleaner.
5. After picking up liquids: Store
the upper section of the
cleaner separately so that
the filter element can dry.
6. Store the vacuum cleaner
in a dry room where it is
protected from unauthorized
use.
ATTIX 360-2M
ATTIX 550-2M
ATTIX 560-2MXC
Do not pick up flammable
substances.
ATTIX 751-2M
ATTIX 761-2MXC