Filter
Top Products
4
CENTIX 60
english
2 Planning the installation
Tips + Tricks:
Use the ground plan of your property
as a planning basis if possible.
Before installing the system you
should answer the following
questions:
1. What condition is the property in?
• In the planning phase
• Carcass complete
• Finished
2. How do you wish to install the suction tubes?
• On the surface
• Concealed
• Are empty shafts available?
3. What material are the walls made of?
4. Where do you wish to locate the vacuum unit?
5. Where do you wish to locate the vacuum sockets?
2.1 Selecting a location for
the CENTIX vacuum
unit
Location
Place the vacuum unit in your house in a location
– Where the sound of the motor causes the least disturbance
– That is central so that the tubes are as short as possible
– That is easy to access for emptying dirt containers
Do not install your vacuum unit in
– Rooms in which there is risk of fire
– Laundry rooms and store rooms
Recommended installation sites are:
• Cellars
• Garages
• Workshops
A socket with a voltage of 230 V/50 Hz is required to connect the
vacuum unit.
Place the unit in a room with an external wall so that the turbine
exhaust can be led to the outside (see section 3.4.3 Exhaust pipe
installation).