Filter
Top Products
3
CENTIX 60
CENTIX 60 PREMIUM
english
Use only the type of power cord
specified in the operating ma-
nual. Do not damage the power
cord (e.g. by moving over it or
pulling or crushing it). Discon-
nect the power cord by pulling
the plug only (do not pull or tug
the power cord).
Inspect the vacuum cleaners to
ensure that they are in proper
condition. Plugs and couplings
in power cords must at least
have splash protection.
Never use the vacuum cleaner if
the filter element is damaged.
Electrical components
Check the rated voltage of the
vacuum cleaner before con-
necting it to the mains supply
system. Ensure that the voltage
shown on the rating plate cor-
responds to the voltage of the
local mains power supply.
If you are using an extension
cord, use only those specified
by the manufacturer or higher
quality ones (see section 9.4
„Technical data“).
It is recommended that the
vacuum cleaner should be con-
nected via a residual current
circuit breaker. This stops the
supply of electricity if the leaka-
ge current to earth exceeds 30
mA for 30 ms or it has an earth
tester circuit.
Arrange the electrical parts
(sockets, plugs and couplings)
and lay down the extension lead
so that the protection class is
maintained.
Never spray water on to the up-
per section of the vacuum clea-
ner. Danger for persons, risk or
short-circuiting.
Observe the latest edition of the
IEC regulations.
Maintenance, cleaning and
repair
Only carry out maintenance
work described in the operating
instructions.
Always pull out the mains plug
before cleaning and mainte-
nance of the vacuum cleaner.
Accessories and spare parts
Use only the brushes supplied
with the vacuum cleaner or spe-
cified in the operating manual.
The use of other brushes can
adversely affect safety.
Use only original Alto accesso-
ries and spare parts (see sec-
tion 9.5). The use of other parts
can adversely affect safety.