Filter
Top Products
-20-
3.1.2 Soap trays
Attention: All products used are harmful and must be handled with caution.
Read the recommendations of the product suppliers carefully.
Before all manipulation: you must use appropriate protective clothing, e.g. gloves,
boots, glasses, respiratory masks, etc.
Detergent:
• Fill the soap trays with the corresponding products when starting a cycle.
• The detergents for washing and pre-washing must be in powder form (or liquid
when automatic feeding by a dosing pump is used).
o There are several different types of detergent, and some of them are more
easily dissolved in water. Consult your supplier, who will provide indications.
Bleach:
• 5 to 10 g of 12° bleach per litre of water.
• Never surpass the lower marking of the siphon of the bleach tray.
Softener:
• Consult supplier. The doses vary according to the products used.
3.1.3 Unbalance and direction of rotation
When you receive the message “unbalance fault“ before ending a cycle, you must
restart the cycle (refer to Ch. 1.4.2).
If the unbalance persists, check the following points
:
• Machine has insufficient load:
Loads must be in the following ranges (dry laundry weight)
UHM027D............. 19 to 27 kg
UHM033D............. 22 to 33 kg
UHM049D............. 38 to 49 kg
UHM067D............. 52 to 67 kg
• Water drainage defective.
• Long pieces of clothes tangle and create knots.
• Heterogeneous load of clothes, differing in type, weights or size.
• Poorly adjusted water level: Upper level ... 140 mm
Lower level ... 60 mm
• Shockbreaker got stuck: the symptom of this problem is an escape of oil on the
skirt of the shockbreaker.
• Wrong direction of rotation of the centrifuge.