3. Operating Instructions
12
AirExhaust Hose
Thehot airexhaust conductsthehot, moistairproduced bythe unitawayfrom
thespace youare cooling. Thewindow kitandexhaust hosecanalso bemoved
fromroom toroom withtheunit. You canexhaust theACP-1300Ebyfollowing
oneof thefollowing twomethods:
Exhaust thehot air througha window or slidingglass door (awindow
kit extensionmay be necessary). Open thewindow or sliding glass
door, installthe window kit, andconnect the exhausthose.
1.
2.
If anexisting window orsliding glass door cannotbe used, acustom
opening througha wall orceiling can be cutout in orderto facilitate
the exhausthose.
PleaseNote:
Thehot airmust beexhaustedin orderfor the unitto produceacooling effect.
WhentheACP-1300Eis notin use,safelystore awaythe exhausthosein a
clean,dry place.
50cm
50cm
50cm
50cm
ExhaustHose
3. Operating Instructions
13
3.The lengthofthe exhausthose
shouldnot beextended past6.5
feet.Replacement hosesare
availablefor purchasethrough
yourNewAir vendor. We also
recommendthat youuse only
certifiedNewAir replacement
parts.
1.The exhausthosecan extend
from1.8 feetto 6.5feet. The
shorterthe hose, thebetter
thecooling effect.
2.
The hoseshould be asstraight
as possible,as sharp orunnece
-ssary bendsin the hosewill prevent effectiveairflow.
This willsubsequently result inoverheating and possible
shut-down ofthe unit.
4. Troubleshooting
Problems
PossibleCauses
SuggestedSolutions
Theunitdoesn'twork.
14
TroubleshootingYourACP-1300E PortableAirConditioner
Beforeinvesting inrepairs, checktosee ifany of thefollowing applytoyou:
Therecouldbepowertrouble.
1.Thepowercordisnot
pluggedin.
2.Thecircuitbreakerhas
beentripped.
3.Thereisaproblemwith
thesocketoroutlet.
4.Eitherthepowercordis
damaged,orthefuse
needstobereplaced.
1.Connectthepowercordcorre-
ctly.
2.Resetthecircuitatthebreaker
box.
3.Changethesocketoroutlet.
4.Taketheunittoaqualifiedtechn-
icianandhavethefusereplaced
(fusespecification:3A/250V).
Theunitstopsworkingonitsown.
Eitherthetimerhasbeen
activatedorthetemperature
intheroomislowerthanthe
settemperature.
Eitherturnthetimerofforwait
fortheroomtemperaturetorise.
Thereisnocoolaircomingout
oftheunitwhenitisincooling
mode.
1.Theroomtemperatureis
lowerthanthesettemp-
erature.
2.Theevaporatorisfrosted
over.
1.Waitfortheroomtemperature
torisetoresumenormal
operation.
2.Allowtheevaporatortodefrost
andnormaloperationwill
resume.
Thereisnocoolaircomingoutof
theunitwhenitisindehumidifying
mode.
1.Theevaporatorisfrosted
over.
2.Theunitiseliminatingfrost.
Allowtheevaporatortodefrost
andnormaloperationwillresume.
ErrorcodeE2isdisplayed onthe
controlpanel.
Thewatertankisfull.
Emptythewatertankand restart
theunit.
ErrorcodeE4isdisplayed onthe
controlpanel.
Thecoilpipeisdamaged.
Replacethecoilpipe.
ErrorcodeE1isdisplayed onthe
controlpanel.
1.Thevoltageistoo highor
toolow.
2.Theunitisdamaged.
1.Restarttheunitwhenthevoltage
isnormal.
2.Havetheunitrepairedby your
NewAirdealerorata professional
repaircenter.
Please Note:
Never serviceyourACP-1300E portable airconditioner by yourself.
If yourunit needs tobe repaired, please contactyour NewAir dealer
or aprofessional repair centerfor assistance.
5. Electric Diagram
15