Filter
Top Products
7
Product
Specifications
Remote Control Functionality ✔✔
Mains Supply ✔✔✔
Lithium Rechargeable Cell Back-up ✔✔
Powered by 3 x AA Alkaline Batteries ✔
Electrochemical Cell CO Sensor ✔✔✔✔
85dB(A) @ 3m Sound Output ✔✔✔✔
Easi-fit System ✔✔
LED Power Indicator ✔✔✔✔
LED Alarm & CO Level Indicator ✔✔✔✔
Digital LCD CO (ppm) Display ✔
CO Level Memory Feature ✔✔✔✔
LED Fault Indicator ✔✔✔✔
Audible Fault Warning ✔✔✔✔
Audible Low Battery Warning ✔✔ ✔
Test/Hush Button ✔✔✔✔
Automatic Reset After Alarm/Test ✔✔✔✔
Interconnection Capability ✔✔
Replaceable Sensor Module ✔✔
Quick CO Gas Test Feature ✔✔✔✔
Pre-Alarm For Low CO Levels ✔✔✔✔
High Level of Gas Type Selectivity ✔✔✔✔
Unit Activation Upon Connection ✔✔✔✔
Soldered Horn Contacts ✔✔✔✔
Tamper Resistant Cover ✔✔✔✔
Tamper-proof Cells ✔✔
Locking Screw Hole ✔✔
Easi-see Easi-connect Wiring Terminals ✔✔
Mains Wiring Cable Cover ✔✔✔
Multiple Cable Entries ✔✔✔
Foam Sealing Gasket ✔✔
Anti-tamper Locking Catch ✔✔
Multiple Fixing Holes ✔✔
Date Code Identification ✔✔✔✔
BS Kitemarked to BS EN 50291 ✔✔✔✔
CE Marked ✔✔✔✔
EMC Conformance ✔✔✔✔
Class II Double Insulated ✔✔✔
UV Stabilised Moulding ✔✔✔✔
Combined Installer/User Instructions ✔✔✔✔
Fixings Included ✔✔✔✔
Typical Footprint Dimensions (mm) 155 x 125 155 x 125 135 x 105 135 x 105
Ei261DENRC
Ei261ENRC
Ei225EN
Ei205ENA
Memory Feature
The Test/Hush button provides a quick, easy means
of both testing the alarm and
controlling any false alarms.Operating
the Test button also activates the
alarm level memory feature.The last
recorded CO level will be shown -
through Alarm LED flash rate or digital
display (Ei261DENRC only).
Quick Test Feature
Operating the Test button activates the quick CO gas
test feature.The unit will then sample for CO 4 seconds
later and give an audible and visual warning if CO is
sensed - saving time and money particularly when
testing units in a large number of properties.
Reliable, Proven Sounder
Giving an output of 85dB(A) at 3m,the alarm signal is
loud.The piezo disc sounder element is securely held
with silicone mastic to prevent creepage and
premature failure. Soldered contacts on the disc further
improve reliability when compared to more commonly
used pressure contacts, which can be prone to failure
due to corrosion and arcing.
Sensor Replacement
Removal
Insert a screwdriver into the
removal slot - releasing the
tamper- resistant clip - and
slide the alarm off.The
cable cover ensures that
the mains cables are not
exposed.
Sensor Replacement
Slide the alarm off the
mounting plate and
pull out the sensor
module using the
exterior tab.
Then simply push the
new sensor module in
and slide the alarm
back on the mounting
plate.
Replaceable CO Sensor
(Ei261ENRC & Ei261DENRC)
33% cost saving over
the life cycle of
comparable products
All CO sensors have a limited life of 5/6
years. But,the unique replaceable
sensor module on the Ei261ENRC &
Ei261DENRC alarms doubles the life
cycle of the product.This simple to
carry out process gives a significant cost
saving and eliminates any inconvenience in
time spent changing the entire unit.
Proven Electrochemical Cell Sensor coupled with
sophisticated electronics provides high quality
detection and reliability.Calibrated in CO gas during
manufacture, accuracy is assured.
Remote Control
Functionality
(Ei261ENRC &
Ei261DENRC)
Ei260 Series incorporates as standard Remote Control
functionality.Allows Alarm Test,Hush and Locate to be
performed from an easily accessible wall mounted
control switch (optional).