Aico 260 Series Smoke Alarm User Manual


 
Innovative Design & Practical Features
Complete Visual Information
Three separate indicating LED's
provide visual information: healthy
mains supply, CO level
sensed/alarm status,and if a fault
is detected during the unit's
integral self-test.
The alarm LED varies its rate of flash depending upon the
CO level sensed - giving further information on any
dangerous levels of CO.
Operating the test button
will also activate the
memory feature and the
LED will indicate the previous
maximum CO level sensed.
Kitemarked to
BS EN 50291:2001
All Ei CO alarms carry the British Standards
Institute Kitemark to indicate that they
have been 3rd party tested,by BSI,to
BS EN 50291:2001.This replaces the previous
BS 7860:1996 and is a more demanding
standard.
The main change to the standard is a
lowering to the CO triggering levels
combined with new time/response limits to
protect more vulnerable people groups and
alleviate false alarms.
6
Rechargeable Lithium
Cells used in Ei261ENRC &
Ei261DENRC Models
High performance
rechargeable vanadium
pentoxide lithium cells are used
in the Ei261ENRC & Ei261DENRC
alarms and offer the most
effective and reliable back-up
power,giving a true 10Yr+ life.
As the cells are rechargeable,
they obviate the need for
battery replacement - saving both time and money.Also,
due to them being an integral part of the internal
circuitry,any possible casual removal is prevented.
Easi-fit Mounting Plate
(Ei261ENRC & Ei261DENRC)
The Easi-fit mounting plate included with Ei260 series
alarms has a built-in connector block with large,clearly
marked 'Easi-see,Easi-connect' wiring connections to
make wiring as simple as possible. Due to the unique
design,no extra pattress or mounting box is required,
saving valuable time and money.
With installation could not be simpler!
Fix the mounting
plate supplied with
the alarm to the
ceiling or wall
during first fix.No
separate enclosure
is required.
Wire the
terminals on
the base plate
and clip on the
protective
cable cover.
Slide the alarm
into place.
There is no
need for extra
connecting
leads or wiring.
1
2
3
Ei261DENRC model with
easy to read digital
display is available