Filter
Top Products
Chapter 3 Award BIOS Setup
43
3.11 Password Setting
To change the password:
1. Choose the "PASSWORD SETTING" option from the Setup
main menu and press <Enter>.
The screen will display the following message:
Press <Enter>.
2. If the CMOS is good or if this option has been used to change the
default password, the user is asked for the password stored in the
CMOS. The screen will display the following message:
Enter the current password and press <Enter>.
3. After pressing <Enter> (ROM password) or the current password
(user-defined), you can change the password stored in the CMOS.
The password must be no longer than eight (8) characters.
Remember, to enable the password setting feature, you must first select
either Setup or System to secure your option in "BIOS FEATURES
SETUP".
3.12 IDE HDD Auto Detection
"IDE HDD AUTO DETECTION" automatically self-detects for the
correct hard disk type.
Enter Password:
Confirm Password: