Filter
Top Products
Chapter 2 Connecting Peripherals
27
2.6 Floppy Drive Connector (CN7)
You can attach up to two floppy disk drives to the PCA-6275's
on-board controller. You can use any combination of 5.25"
(360 KB/1.2 MB) and/or 3.5" (720 KB/1.44/2.88 MB) drives.
The card comes with a 34-pin daisy-chain drive connector cable. On
one end of the cable is a 34-pin flat-cable connector. On the other end
are two sets of floppy disk drive connectors. Each set consists of a
34-pin flat-cable connector (usually used for 3.5" drives) and a printed
circuit-board connector (usually used for 5.25" drives). You can use
only one connector in each set. The set on the end (after the twist in
the cable) connects to the A: floppy drive. The set in the middle
connects to the B: floppy drive.
2.7 CPU Fan Connectors
(CPU1: CN9; CPU2: CN8)
These connectors supports cooling fans of 500 mA (6 W) or less.