Filter
Top Products
16
PCA-6275 User's Manual
1.10 Memory Installation Procedures
To install DIMMs, first make sure the two handles of the
DIMM socket are in the "open" position. i.e. The handles
remain outward. Slowly slide the DIMM module along the
plastic guides on both ends of the socket. Then press the
DIMM module right down into the socket, until you hear a
click. This is when the two handles have
automatically locked the memory module into the correct
position of the DIMM socket. (See Figure 1-2.) To take
away the memory module, just push both handles outward,
and the memory module will be ejected by the mechanism
in the socket.
Figure 1-2: DIMM installation