Filter
Top Products
Using Advanced Functions: Allowing Computer Access to Your System
19
LCD5500Z keypads will display the following message when each zone (detector) is
activated: “Secure System Before Arming < >”, or “Secure System or Enter Code”. Use
the keys to view which zones are open. The message will disappear when the
zones are closed.
On an LCD5501Z keypad, the display says “Open” when any zone (detector) is acti-
vated. To see which zones are open, press . The keypad will scroll the numbers of all
open zones.
On a PC55XXZ keypad, the zone light turns ON when the zone (detector) is activated.
The zone light turns OFF when the zone is closed (e.g., door or window closed).
NOTE: Some features described above will not be functional unless enabled by
your installer. Ask your installer which features are functional on your system.
Allowing
Computer
Access to Your
System
From time to time, your installer may need to send information to or retrieve information
from your security system. Your installer will do this by having a computer call your system
over the telephone line. You may need to prepare your system to receive this ‘downloading’
call. To do this:
1. Press [Master code] at any keypad. This allows downloading for a limited
period of time. During this time, the system will answer incoming downloading calls.
For more information on this feature, please ask your installer.
Turning the
Door Chime
On or Off
If your installer has enabled the door chime feature, your system keypads will sound a tone,
or beeps, whenever designated doors or windows are opened or closed. Your installer has
programmed which doors and windows will activate the door chime.
1. Press to turn the door chime feature ON
The keypad will beep 3 times.
2. Press again to turn the door chime feature OFF
The keypad will sound one long beep.