Acroprint ES700 Electric Heater User Manual


 
iv
PRECAUTIONS
ALERT DESCRIPTION
Insert the power plug as far as it will go. Improper insertion of the plug may
result in fire or electric shock.
Do not disassemble the unit. High voltage is present inside that may lead to an
electric shock.
Do not modify the unit. Modifications may cause a fire and/or electric shock.
Do not use any voltage of the power source other than designated.
Do not share a single outlet with another plug. This may lead to a fire or electric
shock.
Do not damage, break, or modify the power cord.
Do not put heavy objects on, pull, or forcefully bend the cord. These may dam-
age the cord, possibly resulting in a fire or electric shock.
Do not plug or unplug the unit with a wet hand. This may lead to an electric
shock.
Do not place the unit on an uneven or tilted surface. This may result in injuries
due to the unit dropping or falling off.
Do not put a water-filled container or a metal object on top of the unit. If water is
spilled or the metallic object slips inside, a fire or electric shock may occur.
Do not install the unit in a humid or dusty environment. This may result in a fire
or electric shock.
Do not place the unit near a kitchen counter or humidifier. Oil, smoke, or steam
generating from them may cause fire or electric shock.
Do not yank the power cord to disconnect from the outlet. Hold the plug with
your hand to do so, or the cord may be damaged. This may lead to a fire or elec-
tric shock.
Do not insert or drop any other time card than specified into the slot. Such mis-
use may cause a fire or electric shock.
Do not come in contact with the print head. This may result in personal injury.
If any anomaly occurs, for example, heat or smoke is generated or an odor is
emitted, unplug the unit immediately and contact your dealer for servicing.
There is a danger that further use may cause a fire or electric shock.
If foreign matter should get in the unit (including a piece of metal, water, or liq-
uid), disconnect the plug from the outlet immediately and contact your dealer
for servicing. There is a danger that further use may cause a fire or electric shock.
Remove the line cord plug from the outlet before transferring the unit, or it may
damage the cord. This may lead to a fire or electric shock.
If the unit should be dropped or the case is broken, unplug the unit and contact
your dealer for servicing. Further use may lead to a fire or electric shock.