4XEM IPCAMW40 Home Security System User Manual


 
- 46 -
Viewing system log
Click the link on the configuration page to view the system log file. The content of the
file provides useful information about configuration and connection after system
boot-up.
Viewing system parameters
Click on this link on the configuration page to view the entire system’s parameter set.
The content is the same as those in CONFIG.INI.
Restore factory default settings
Click on the link on the configuration page to restore the factory default settings. Any
changes made so far will be lost and the system will be reset to the initial factory
settings. After clicking on the “Restore” button and make confirmation, the system will
restart and require the installer program to set up the network again.