Filter
Top Products
Downloading Software
47
3
At the prompt, enter
nvData
The nvdata menu options screen appears.
4
At the prompt, enter
emergencyDownload
The following prompt appears:
Enter file server IP address {?} [<IP address>]:
Where
<IP address>
is the location of the server where the
non-corrupted software image file resides.
5
To modify the indicated IP address, enter an IP address, or to keep the
existing IP address, press Enter.
The following prompt appears:
Enter image Name {?} [<image name>]:
Where
<image name>
is the stored image that you want to download.
6
Enter the <imagename> for the module to which you are connected.
<imagename> is the image name with the .ALL extension for this
module.
The following prompt appears:
Enter file type {?} [file type]:
7
Enter
all_image
for
file type
.
8
Enter
q
and press Enter until you reach the top-level menu options screen.
9
To close the menu options screen, enter
disconnect
10
To update the Automatic Emergency Download fields in the EME
show module <slot>.1
command display, reset the module using the
following EME command:
CB9000> reset module <slot>.1
You must complete step 10 to ensure that the module is updated.