6
6
68 • Tyros3 Owner’s Manual
Registration Memory – Saving and Recalling Custom Panel Setups –
Registration Memory
– Saving and Recalling Custom Panel Setups –
The Registration Memory function allows you to save (or “register”)
virtually all panel settings to a Registration Memory button, and then
instantly recall your custom panel settings by simply pressing a single
button. The registered settings for eight Registration Memory buttons
should be saved as a single Bank (file).
1 Set up the panel controls (such as Voice, Style, effects, and so
on) as desired.
2 Press the [MEMORY] button above the REGISTRATION MEM-
ORY section.
The display for selecting the items to be registered appears.
3 Determine the items you want to register.
Select the desired item by using the [2 ▲▼]–[7 ▲▼] buttons, then enter or
remove the checkmark by using the [8 ▲] (MARK ON)/ [8 ▼] (MARK OFF)
buttons.
To cancel the operation, press the [I] (CANCEL) button.
4 Press one of the REGISTRATION MEMORY [1]–[8] buttons to
which you wish to memorize the panel setup.
The memorized button becomes red, which indicates the number button con-
tains data and its number is selected.
Registering Your Panel Setups
3
If you select the button whose
lamp is lit in red or green here,
the panel setup previously memo-
rized to the button will be erased
and replaced by the new settings.
CAUTION
