Operation and Status
Data – System Status Screen
Wan Interface Parameters
MAC Address
The hardware address of this device, as seen by remote devices
on the Internet. (This is different to the hardware address seen by
devices on the local LAN.)
Dynamic DNS
Enabled / Disabled
Access Mode
This indicates the current connection method.
Fixed IP, DHCP or PPPoE
IP Address
This IP Address is allocated by the ISP (Internet Service
Provider).
Subnet Mask
The subnet Mask (Network Mask) for the IP Address above
Default Gateway
The IP Address of the remote Gateway or Router associated with
the IP Address above
Primary DNS Server
The IP Address of the Domain Name Server which is currently
used.
Secondary DNS
Server
The IP Address of a backup Domain Name Server which could
be used if the Prmary DNS Server fails.
LAN Interface Parameters
MAC Address
The hardware address seen by devices on the local LAN. (This is
different than hardware address of this device, as seen by remote
devices on the Internet)
IP Address
The IP Address of the TVP-224HR.
Subnet Mask
The subnet Mask (Network Mask) for the IP Address above.
DHCP Server
This shows the status of the DHCP Server function - either
"Enabled" or "Disabled".
For additional information about the PCs on your LAN, and the
IP addresses allocated to them, use the PC Database option on
the Other menu.
No. of DHCP clients
This shows the possible number of Clients as chosen
Starting client addr
The starting IP address to be assigned by the DHCP Server
Firmware Version
TVP-224HR Version
This displays the firmware version of the TVP-224HR.
Boot Version
The current boot version.
39
