43
Setting up the
Network Setup
Options
Setting up from TopAccess
1
Accessing the TopAccess for Administrator.
P23 “Accessing TopAccess for Administrator”
2
Accessing the Port Setup page.
1. Click on the Network SETUP menu.
2. Click on the Port tab.
3
Select the ethernet speed at the Transmission
Speed drop down box and click on [SETUP].
4
The message “Reset the Printer Enable
Setting” is displayed on the top of a page.
Perform resetting the GA-1140.
P125 “Resetting the GA-1140”
• The setting changes on the Network options is
applied after resetting the printer. If you want to set
other network options, you can also proceed the
operation for setup before resetting the printer.
