A SERVICE OF

logo

August, 2006 IMAGE ADJUSTMENTS
3-179
3.19.2 ARDF
ARDF side-to-side and leading edge registration
Make a temporary test chart as shown above using A3/DLT paper.
1. Place the temporary test chart on the ARDF table and make a copy.
2. Check the registration, and adjust using the following SP modes if necessary.
SP Code What It Does Adjustment Range
SP6006 001 ADF Main Reg Adj
± 3.0 mm
SP6006 003 ADF Sub Reg Adj
± 29 steps
SP6006 005 ADF Buck Adj:Front
± 20 steps
SP6006 006 ADF Buck Adj:Back
± 20 steps
SP6006 007 ADF TEdge EMargin
± 20 steps
B146R964.WMF
B
A
B146R965.WMF
A: Leading edge registration
B: Side-to-side registration