A SERVICE OF

logo

4 Replacement Procedures 4.18 System board
4-36 PORTEGE A100 Maintenance Manual (960-460)
Installing a system board
To install a system board, perform the following procedure. (See Figure 4-26.)
1. Set the system board on the base cover in place and fix it with the following screws.
M2.5×12B FLAT BIND screw x1
M2.5×4B FLAT BIND screw x1
2. Connect the CPU FAN cable to the connector PJ8770 on the system board.
3. Cover the connector PJ8770 with the insulator.