A SERVICE OF

logo

Tests and Diagnostics
3-118 [CONFIDENTIAL] PORTEGE M780 Maintenance Manual (960-809)
3.34.6.3 Explanation of HDD Logical Each Item
Specify test file count… test file count setup is validated. Test target path
setup becomes invalid. Default value is effective.
1Pass Count number of test files is set up. When reading inspection of the
specified number of test files is completed, it is considered as One pass. setting
range is 2000 to 100000. Default value is 2000.
Target drive list drive for a test is set up. As for the default value, all the
drives are chosen. It is necessary to certainly check one or more drives.
Defaultsetup is changed into a default value.