A SERVICE OF

logo

Open as PDF
next previous
36 Sun Blade X6270 Server Module Installation Guide • December 2009
FIGURE 3-1 Inserting the Server Module Into the Chassis
4. Push the server module into the slot until the server module stops and is flush
with the chassis.
See Boxes 2 and 3 in
FIGURE 3-1.
5. To lock the server module into the chassis, do the following:
■ Rotate the top ejector down until it snaps into place. See Box 3 in FIGURE 3-1.
■ Rotate the bottom ejector up until it snaps into place. See Box 3 in FIGURE 3-1
The server module is locked in the chassis (Box 4 FIGURE 3-1) and Standby power
is applied to the server module SP.