Altivar
®
58 TRX AC Drives
PowerSuite™ Software Option and Magelis® Terminal
25
09/2003
© 2000–2003 Schneider Electric All Rights Reserved
POWERSUITE OPTION
PowerSuite software is a Windows
®
-based program providing an intuitive, graphical user interface for
the Altivar 11, Altivar 28, and Altivar 58 TRX drive controllers, and Altistart
®
48 softstart controllers. The
software is designed to run on:
• Any PC using the Microsoft
®
Windows 95, Windows 98, Windows NT
®
, or Windows XP
®
operating
system
•HP
®
Jornada
®
520 or 540 series Pocket PC (PPC) using the Windows CE V3.0 operating system
• HP Jornada 560 series PPC or Compaq
®
iPAQ™ 3800 and 3900 series PPC, using the Windows CE
V3.0 2002 operating system. PowerSuite V1.5 or later is needed for iPAQ PPCs.
The PowerSuite commissioning software allows you to:
• Create, modify, and store controller configurations
• Transfer data to and from the controller
• Print a hard copy of the controller configuration for reference
In addition, for ATV28, ATV58, and ATS48 controllers:
• Operate the controller to verify proper commissioning
• Display and view run time data
• Display and view faults and fault history
When using the PC software, no access restrictions exist unless an access code has been configured.
MAGELIS TERMINAL
The Magelis terminal offers a unique solution for upgrading the user interface to one drive or multiple
drives. The Magelis terminal can be used to connect up to 8 drive controllers via a Modbus RS-485
multi-drop link. The Magelis terminal can be used with ATV28 and ATV58 TRX drive controllers. The
display is 240 x 64 pixel monochrome matrix backlit display.
The Magelis terminal has a factory loaded HMI application.This is easily modified with the XBT-L1003
software package to customize and configure the display. The terminal can be used to monitor, make
adjustments to, and diagnose the drive controller. Drive status, operating parameters, and I/O status can
be viewed.
The terminal requires a 24 Vdc power supply. A cable, (XBTZ908) is included for connection to a
TSXSCA62 tap. The ATV58 TRX drive can be connected to the tap with the RS-485 Connection Kit
(VW3A58306U) cable.
PowersuiteScreen150.eps
