Appendix
122
7
Configuring a WINS Server
The printer can be configured to register its NetBIOS name with a WINS server
when power is turned on. This enables the NetBIOS name of the printer to be
specified from SmartNetMonitor for Admin even under a DHCP environment.
This section describes how to configure the WINS server.
Note
❒ The WINS Server is supported with Windows NT 4.0 Server Service Pack 4 or
later, and Windows 2000 Servers WINS Manager.
❒ For more information about the WINS Server settings, see Windows Help.
❒ If there is no reply from the WINS Server, the NetBIOS name will be regis-
tered by broadcast.
❒ The NetBIOS name consists of up to 13 alphanumeric characters.
Using a WWW browser
A
AA
A
Start the Web browser.
B
BB
B
Point your browser at the URL or IP address of the printer (e.g. ht-
tp://XXX.XXX.XXX.XXX where the Xs are the number of the IP address).
The status of the printer you chose appears on the Web browser.
C
CC
C
Click Network Config.
The dialog box for entering the password and user name is displayed.
D
DD
D
Enter your user name and password, and then click OK.
To use the factory default account, enter no user name and type "password"
for the password.
E
EE
E
Click TCP/IP.
F
FF
F
Set WINS to active and enter the IP address of the WINS server in Primary
WINS Server and Secondary WINS Server.
G
GG
G
Click Refresh.
H
HH
H
Exit the Web browser.
