NetWare Configuration
50
5
Installing SmartNetMonitor for Admin
Install SmartNetMonitor for Admin on your computer. For the installation pro-
cedure, see the Setup Guide.
After installing SmartNetMonitor for Admin, see one of the following sections:
• To configure the Network Interface Board as a NetWare print server for the
first time, see p.51 “Quick Setup Using the NIB Setup Tool Wizard”.
• To use this computer with NetWare 3.x as a print server, see p.54 “NetWare
3.x - Advanced Settings”.
• To use this computer with NetWare 3.x as a remote printer, see p.54 “Net-
Ware 3.x - Advanced Settings”.
• To use this computer with NetWare 4.x, 5 or 5.1 as a print server, see p.60
“NetWare 4.x, 5/5.1 - Advanced Settings”.
• To use this computer with NetWare 4.x, 5 or 5.1 as a print server, see p.60
“NetWare 4.x, 5/5.1 - Advanced Settings”.
Running the NIB Setup Tool
A
AA
A
Click [Start], point to [Programs], and then click [NIB Setup Tool] in the [Smart-
NetMonitor for Admin] program folder.
