Using the TV’s Features
Chapter 3 37
1. Press MENU (the TV MAIN MENU appears).
2. Highlight Channel and press OK on your remote
control.
3. Highlight Auto Tuning and press OK.
4. Choose which channel you would like to set:
Set VCR 1 Channel Displays a list that lets you set
up the channel that the TV tunes to when you press
the VCR1 button on the remote.
Set VCR 2 Channel Displays a list that lets you set
up the channel that the TV tunes to when you press
the VCR2 button.
Set DVD Channel Displays a list that lets you select
the channel that the TV tunes to when you press the
DVD button.
Set SAT/CABLE Channel Displays a list that lets you
set up the channel that the TV tunes to when you
press SAT•CABLE.
5. Highlight the choice that matches the way you have
the component connected to this TV, and press OK.
The choices and a brief explanation follow:
Not connected Choose this if you don’t have this
particular component connected to the TV, or if you
don’t want the TV to automatically tune to the correct
channel when you’re using this component.
Channel 2 (SAT/CABLE only) Component (satellite or
cable box) is connected to the CABLE/ANTENNA jack on
the back of the TV, and you want the TV to tune to
channel 2 when you press the SAT• CABLE button on
the remote. Reminder: make sure the component’s
Channel 2/3/4 switch is set to channel 2. Usually this
switch is on the back of the component.
Channel 3 Component is connected to the CABLE/
ANTENNA jack on the back of the TV, and you want the
TV to tune to channel 3 when you press the
corresponding button on the remote. Reminder: make
sure the component’s Channel 3/4 switch is set to
channel 3.
Channel 4 Component is connected to the CABLE/
ANTENNA jack on the back of the TV, and you want the
TV to tune to channel 4 when you press the
corresponding button on the remote. Reminder: make
sure the component’s Channel 3/4 switch is set to
channel 4.
Video Input Component is connected to the VIDEO
jack on the back of the TV and you want the TV to tune
to VID (SVID if you used an S-Video cable) Input
Channel when you press the component button.
Note: You should choose this for your VCR if
you connected it to the TV with audio/video
cables.
TV MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
8 Setup
0 Exit
CHANNEL
1
Auto Channel Search
2 List and Labels
4 Video Input Source
0 Exit
3 Auto Tuning
1 Not connected
2 Channel 2
3 Channel 3
4 Channel 4
5 Video Input
SET VCR1 CHANNEL
1569452A.03 Features 4/9/02, 12:57 PM37
