A SERVICE OF

logo

Open as PDF
next previous
Quick Guide to Your TV
Startup
2
Plug the cord into the outlet,
matching the wide and the small
end of the plug with the outlet.
2. Plug in the TV
1. Hook up your TV
Details are in the Connections
Guide.
Hook up any antennas, cables or
other equipment to your TV before
you follow the steps below.
The steps below will get your TV connected and ready for watching. For
more details, see the page numbers listed.
3. Put Batteries in the Remote
A. Pull off the cover of the battery
compartment.
B. Place the four AAA batteries as
shown, matching the + and –
end of each battery in the
compartment.
C. Replace the cover.
CONNECTIONS
GUIDE
Use This Book First!
To Find
Your Hook-up
Turn To
Page 1
THIS GUIDE
SHOWS HOW
TO HOOK UP
YOUR TV
AND OTHER
COMPONENTS.
CAUTION: Matching stands were designed to be used with 25 inch and larger table model TVs. The
recommended stands are provided with hardware to secure the TV to the stand so that it cannot be easily
pulled off or tipped over. Your RCA dealer can help you choose the appropriate stand for your TV.
If you choose to use a stand with your TV, take precautions that the stand or other furniture the TV is placed
on is properly located and of adequate size and strength to prevent the TV from accidentally being tipped over
or pulled off. This could cause damage to the TV and or personal injury.
Stands are not available by mail order. To locate your nearest RCA dealer call 1-800-366-1900.